China Cast Check Valves factory

Discussion in 'Battlefront Heroes' started by jalsedar, Feb 17, 2020.

Tags:
  1. jalsedar

    jalsedar
    ExpandCollapse
    Rebel Scum

    Joined:
    Feb 17, 2020
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    0
    Allegiance:
    Rebel Alliance
    Gaming Platform:
    Xbox Console
    Product Details
    NSV Cast Steel Swing check valves, like all check valves, are used to prevent back flow in the line. The pressure of the fluid passing through a system opens the valve, while any reversal of flow will close the valve. The swing check valve functions by allowing flow forces to move the closure element, it is a hinged clapper which swings or rotates around a supporting shaft.
    Applicable Standard
    Design Standard: BS 1868, ASME B16.34, API 6D, DIN2533
    Face to Face: ASME B16.10, API 6D, EN 558, DIN 3202
    End Flange: ASME B16.5, ASME B16.47, DIN2501, DIN2533
    Butt welding Ends: ASME B16.25, DIN3239
    Inspection and Test: API 598, DIN3230
    Products Range
    Size: 2" ~ 24" (DN50 ~ DN600)
    Rating: ANSI 150lb-1500lb
    Body Materials: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel
    Trim: Per API 600
    Design Features
    Full open design
    Bolted cover
    Swing type disc design
    Renewable or and welded seat
    Flanged or butt welding ends
    STRUCTURAL FEATURES
    鈼?Body--Cover
    Precision machined castings.
    Exclusive: Disc shaft does not penetrate body.
    鈼?Body and Cover
    Body and cover joint: Accurately machined,
    fully-enclosed gasket.
    鈼嶥isc
    Robust one-piece construction to withstand the severe shock of check valve service. Hardfaced with 13Cr, CoCr alloy, SS 316, or Monel, ground and lapped to a mirror finish. Sizes NPS 2鈥? (DN 50鈥?50) may have solid CA 15 (13Cr) disc. SS鈥?16 disc with CoCr alloy facing also available.
    FAQ
    1.Q: What鈥檚 the brand of your company can supply ?
    A:NSV or OEM service
    2.Q: Do u provide sample,is it free or extra ?
    A: Yes, we could offer the sample, due to its value,we can supply free sample that small value and you afford the freight,but also welcome visit our factory to inspect quality.
    3.Q: What鈥檚 your payment terms?
    A: As our company鈥檚 policy, we normally have bellow 3 payment terms,it also can negotiation both parties before confirm order.
    1) 100% T/T or West Union in advance that order value within $2,000.00USD.
    2)30% T/T advance+70% balance after the shipment for the order value above $2,000.00USD.
    3)L/C at sight for the order value above $50,000.00USD.China Cast Check Valves factory
    website:http://www.nsvvalves.com/check-valves/cast-check-valves/
     

Share This Page